Tag: glacier clay

Posted on by — Leave a comment

Sedna with Two Part Glaze

Inuit goddess of the sea, Sedna

Sedna, collagraph print on Cook Inlet clay, double glaze application, 8″ x 8″, $145

The summer selling season is finally over! I was selling tiles at the outdoor Anchorage weekend market, inside the Anchorage Museum, outside at the Alaska Native Heritage Center, and at other arts and crafts fairs. There wasn’t time to keep up the posts here at this WordPress blog. In April, me and my girlfriend used airline miles to go to Portugal to visit the largest tile museum in the world in Lisbon, and we added a side trip to Barcelona to look at Gaudi stuff. Prices were very reasonble, outside of the big cities, I don’t think we spent more than $50 a night for hotels. Portugal is nearly covered in tiles! Since coming back, I’ve been searching for decent coffee, because the small cups of coffee that the Portugese make is the best coffee that I have ever tasted. Doppio is the closest that I’ve come to a decent cup here in Anchorage. There was about eight-feet of snow on the ground in Anchorage when we left and it was all gone when we got back.

Anyway, The Sedna tile has an undercoat of two different strontium carbonate glazes covered with my regular glazes, so that the result is a reduction fired surface, but fired in an electric kiln. Ceramics Monthly had an article by Steven Hill early this year describing the process. I like it. I went to a NCECA (National Council of Educators in Ceramic Arts…I think) conference in April in Seattle and saw some bowls with the glaze treatment by Mr. Hill and they were cool.

Posted on by — 3 Comments

Six-Inch Multiglaze Raven


Six-Inch Multiglazed, Collagraph Printed Raven, $75

Photos of a raven collagraph plate, two raven tiles, and the back side of one of the tiles. On the “back side” photo, you can see my name at the top, and underneath is “Silver Hand Artist”, which means I’m registered with the state of Alaska as an Alaskan Native Artist. The tile was printed on January 17, 2012. The five stamps are decoration, but a couple hundred years from now, people will think it’s some kind of code. “Cook Inlet Glacier Clay” means that the main clay in the tile body is from the mud flats next to Anchorage, Alaska. “Vitrified” means that it is fused and has less than 1/2 percent water absorbtion, so it is similar to porcelain in that respect.

I like doing different color combinations; though some designs will settle down in one or two versions over time. I mixed a new glaze called “floating green” that is used for the bottom ground in one of the tiles. I like developing new glazes. I mix my own, usually from recipes in books or on-line. Some glazes need a bit of tweaking before they work on the local clay.

The collagraph plate that was used to print the raven tile is made of 140 lb. etching paper and matte board. It is coated with gesso and acrylic matte medium.

Posted on by — 2 Comments

Twelve-Inch Plaster Mold Tiles


This is part of the studio space where I make tiles. I’m currently working on a large mural that has nineteen twelve-inch tiles and fifty-one four-inch plant impressions. I make the original and then cast a plaster mold of the tile. Wire racks are for making sure the tile dries from both sides. My Cook Inlet clay body works great for tiles. Even the large tiles hardly warp at all. Noticable on one tile is a raven and on another is a tree. It’s great to do some relief tiles every once in a while. The molds weigh about forty pounds each.

It has snowed a couple of feet in the last few days and has been below zero every day for more than two weeks now.

Posted on by — 1 Comment

Four Spotted Skimmer Dragonfly

Four Spotted Dragonfly

Six-inch Dragonfly, $75
Contrary to popular belief, the mosquito is not Alaska’s state insect. That would be the four spotted skimmer dragonfly. The four spots are on the leading edge of the wings. They get fairly large, four to six-inch wing span. Once when I was selling tiles at the Alaska Native Heritage Center, a dragonfly landed on one of the dragonfly tiles. That was cool. Later in the summer, I was telling another artist about the incident and wouldn’t you know it, but a dragonfly landed on my shoulder. It was close to my ear and it startled the bejezzers out of me. Anyway, it is a great story to tell visitors interested in the design, and I feel there is more to the incident than mere coincidence, sort of like nature saying, “nice tile”. I’ve seen dragonfly designs in the magazine “American Bungalow” and the design of my tile does have an arts & crafts feel to it.

Posted on by — 4 Comments

Three Hares

Three Hares
Three Hares

Three Hares, six-inch, $75
Cook Inlet glacial clay art tile with collagraph printed hares in x-ray style of coastal Inuqiaq. Three hares, three ears, yet each hare has two ears! A while back I made a large woodcut (about 3-1/2′ x 5′ – playing card aspect) using a sheet of plywood that required a steamroller to print an image of three hares similar to this tile, and titled the Three of Hares. It was the third steamroller print event put on in Anchorage. The idea for the three hares came about as a piece in a local group show with a theme about St. Francis and a hare that leads other animals to their respective heavens (put together by James Riordan, an assistant professor at the University of Alaska, Anchorage). The image of three hares was in some medieval monastaries and represented the trinity, but of course, the original design is much older, Etruscan, and historians don’t know what significance it had. Someone referred to the tile as the three rabbi’s.

Posted on by — Leave a comment

Caribou

Caribou

X-ray Caribou
Caribou

Six-Inch Caribou, $75
Collagraph print on clay tile body made from local glacial mud flats. The x-ray style, the depiction of the insides such as the ribs and stomach, is common to the coastal native Alaskans such as the Yupiq and Inupiaq (Eskimos). The big dipper to the polar Inupiaq represents a herd of caribou. The polar star that people in lower latitudes refer to as the north star is not used for directions in the arctic because it is over head and unmoving and doesn’t help in determining directions. I’ve seen caribou carcasses in yards in Point Hope, my mother’s village. They were frozen and being eaten by dogs – a kind of old school dog food.

The two newer glaze colors used on this tile are nutmeg for the background and tenmoko gold used for the body. I mix my own glazes and these two were made at the same time, and each glaze, when wet looks like the other glaze’s fired color. It was confusing. This one potter at a craft show asked if I was a “purist” when I told him about making my own clay and mixing my own glazes. I do it because people like that the materials are local and the imagery is a contemporary take on traditional designs. Also, now that I know that hand built, pit fired ceramics were made in my ancestral area of Northwest Alaska for thousands of years, I will someday, test some of that areas clay for use in my tile work.

Posted on by — Leave a comment

Horizontal Pictogram: Seal, Fox, Caribou

Seal, Fox, Caribou
Horizontal Pictogram: Seal, Fox, Caribou
6″ x 6″ x 3/8″, $65
Copper plate engraving, printed on slipped glacial clay, mason stains, cone 6 oxidation.

Posted on by — 3 Comments

Revised Fox & Hare

Fox & Hare, or why night follows day
Fox & Hare, 6″ x 6″ x 3/8″, $75
One villages tale of why night follows day. The fox is the moon and the hare is the sun and they are in this continuous chase through the sky, and that is why night follows day. This is a revision of an earlier design which had the hare sort of upside down. The collagraph plate was about seven years old and wearing out, so it was a good time to make a new printing plate with a slightly different layout. The xray style is indiginous to the coastal areas of Alaska.

The red is new, it is a majolica base with red stain and without the opacifier. Also new is the temuko gold for the background. The clay is from the mudflats next to Anchorage, Alaska.

Posted on by — 1 Comment

6″ Copper Plate Etching on Clay


Tile on the left and copper plate etching/engraving on the right. Click on the copper plate image to see a better quality scan.

The copper plate is an engraving that is used to print onto the clay. I have a large etching press that I use to print on the clay like if it were paper. I don’t have a problem with the clay curling during firing since I make my own clay body and have added stuff to the clay body to counter the tendence of flat tiles to warp and crack.

The image on the right of the tile is a white whale, the center is a half man half seal, and on the left is a swan turning into a salmon. The three are samples of Alaska native art that were once drawn on the bottom of wood food bowls or on skins.

Posted on by — Leave a comment

Object Runway 2011, Anchorage, Alaska

Object Runway 2011, paper coat

What can I say. I got People’s Choice Award for my coat construction in this years Object Runway show. I can’t make tiles all the time. It was nice to do something a bit different while the tile business is slow during the winter. I cut out small animal designs and lined the bottom edge, like the way old time parkas had your area or family designs along the bottom. The coat is made from etching paper, 140 lb cotton paper, sewn together from a design that I got at a Joann store, a former project runway design. The paper is coated with gesso, acrylic medium, and inked in burnt umber, with most of the color wiped off to give it some surface texture. The buttons are made from the local glacial clay from the inlet and fired like two days before the show and quickly sewn on. It was a fun night. My model, Moriah Walker, was beautiful and helped sell the design. I’ll post a picture of the backside when I can, it has a x-ray style, double seal cut out in red.