Collagraph Plate, Wolves

Plate to print wolves tile.


Plate used to print wolves tile constructed of matte board and 140 lb. cotton rag etching paper. Glued together with gesso and coated with acrylic medium. The plate is good for 100 or so printings. The tiles I print with the plate are therefore a limited edition, handpulled print, but without numbering, and of course on clay instead of paper. They are more valuable than any machine made, mass produced pseudo art tile. The etching paper is the negative space on the plate and the recessed line on the plate creates a raised, printed black line on the clay. I wax the black line and that keeps the different glazes separate in the final firing. The constant wiping with the tarleton cloth slowly wears away the acrylic medium and eventually the gesso. You can see the greying of the edges and smaller areas where the ink is starting to stain the underlying paper. This six-inch design has more color glazes than other designs, it can have ten or more glazes.

About Ed Mighell

Former civil engineer turned artist. Received BFA in printmaking. I developed a nice tile clay body using the glacial clay from the inlet next to Anchorage. I sell mainly at the Alaska Native Heritage Center during the Summer. I also go outside, what Alaskans call the rest of the U.S., to large arts and crafts fares.
This entry was posted in Uncategorized and tagged , , , , , , , , , , , , , , , . Bookmark the permalink.

Leave a Reply